Solar Panel Regulator
Solar Panel Regulator
Solar Panel Regulator information and products are listed below:
|
|
Sunforce 7 Amp Charge Controller $17.41 The Sunforce 60012 7 Amp Charge Controller prevents overcharging of 12-volt batteries. It is intended for use with 12-volt solar panels, and can handle up to 7 amps of array current and up to 100 watts of solar power. The controller is easy to use with a charging light that indicates that your battery is charging, and a green light that indicates a fully charged battery. The 60012 measures 4 x 1 x… |
|
|
Sunforce 50033 15-Watt Solar Charging Kit $94.95 Works with Automobiles/Boats/Tractors/ATVs/Electric Fences/Deer Feeders/Telemetry and More. Maintenance Free / Easy Installation. Pre Cut Holes for Easy Installation. 4 Stainless Steel Screws. Battery Clamps. CLA Adapter. 12ft Wire. 7 Amp Charge Controller. Works in All Weather Conditions. Ultra Bright Blue LED Provides Charging Indication. Built-in Blocking Diode Protects Battery Discha… |
|
|
Sunforce 60032 30 Amp Digital Charge Controller $78.52 Prevents overcharging of 12volt batteriesProtects battery from overcharge and dischargeFor use with 12 volt Solar Panels and batteries onlyHandles up to 30 Amps of Array currentHandles up to 500 Watts of solar powerMaintenance free protection of your solar panel and batteriesMaintains battery voltageMaintain 12 volt batteries in a fully charged state1 Year Warranty… |
|
|
Sunlight 10 Charge and Lighting Controller $97.00 This is the perfect choice for a solar charge controller for lighting systems. Features advanced digital technology for accuracy and fully automatic operation. This controller allows you to choose when your lights turn on and off. Settings for dusk to dawn, dusk + 2, 4, 6, 8, or 10 hours. Also has settings for dusk + 6 + 2 hours before dawn, dusk + 4 + 2 hours before dawn and dusk + 3 + 1 hours … |
|
|
Sunforce 60031 10 Amp Digital Charge Controller $32.52 The Sunforce Amp digital charge controller is the perfect solution to prevent the overcharging of 12V batteries. They protect the battery from both overcharge and discharge. This product is for use with 12 Volt Solar Panels and batteries only. The units handles up to 10 Amps of array current. The `60021 unit allows for completely maintenance free protection of solar panels and batteries. The 60031… |
|
|
HQRP Solar Power Controller 10Amp 150W with Digital LED Display plus HQRP UV Chain / UV Radiation Health Tester $29.91 Regulations point: 14.4 Volts; Low voltage Disconnect: 11.1V Volts; Low voltage Reconnect: 13.1 Volts; Microcontroller digital accuracy; Type of Charging: Series PWM & stat of charge(SOC); 4 Stages: equalization, PWM, Boost and Float, temperature compensated charging; Electronic protections: Short circuit and over current-solar and load; Reverse current at night; Limits high voltage to protect loa… |
How to Build a Solar Panel
The price of energy just keeps going up and up. The cost of energy will continue to go up even more as nations begin to regulate Green House gases and force utility companies to clean up the air. I am not at all against regulating Green House gases; I’m just against having to pay more for it.
Though many people feel that there is no recourse to this ever escalating cost of energy, I believe differently. I want to move to Renewable Energy Sources such as wind and Solar Power. These renewable resources allow each of us benefit the environment and at the same time become more energy self-sufficient.
The simplest way I know to start down the path to energy independence is through the use of Solar Panels. The solar panel converts sunlight into electricity and can easily offset all or at least some of your electricity needs depending on where you live. The benefit to using Solar Panels is that they are completely green. There are no negative effects to the environment.
Now there are two ways to go about getting a solar panel for your home. You can go the commercial route and buy a solar panel or you can build your Own Solar panels.
If you buy the panels you will find that they are expensive. This simply has to do with the economies of scale in manufacturing. Employess need to be paid and their salaries are coming out of each solar panel that is sold. The fewer sold, the more salary is paid per panel and the higher the cost.
There is another option. You can build you Own Solar panels. Simply ask the question, “How to Build Solar panel?” You’ll find many resources available to you that will instruct you on how to build these panels.
You do not need expensive exotic materials to build these panels. You can build them from everyday materials that you can find at your local home builders store. All you need is a do it yourself attitude. That is the beauty of it all. You can build Your Own Solar Cells cheaply and save even more money.
So question one is this, “Do you want to keep paying the every increasing cost for electricity or do you want to become energy independent?” Next, ask yourself, “How to Build Solar panel?” Google it if you want. Get the information and go for it. Build Your Own.
Think about it for a moment, if each one of us can generate just 20% of our energy needs through Renewable Energy, which reduces the needs to commercially generate power by 10%. Little by little as we increase our energy self-sufficiency, we can clean up the environment, reduce green house gases and become energy independent.
That is the choice you get to make. Do you want to be energy independent or not? Do you want to keep paying higher prices for energy or not? The choice is yours.
Ask the question, “How to build solar panel?” then build it yourself and begin your journey to energy independence through renewable energy.
About the Author
The author is an advocate on using
solar panels and
on how to build
solar panel at home
Solar Workshop – Charging Regulators & Shunts
